Brakes/Levers/Pads

Meet the new standard for hard-hitting, heavy-duty braking. We added 15% extra piston power and 30% more volume in the lever reservoir, ensuring peak performance for the full run. And with SwingLink and Lever Pivot Bearing technologies, lever feel remains smooth and progressive, no matter how hard the pull. Go deeper and grab more power. - Designed specifically for heavy-duty demands. - Pivot bearing offers crisp lever feel and a fatigue-free ride. - Metallic pads come standard for more power and longer wear.

SRAM's CenterLine rotors are light-weight, quiet, smooth and robust, featuring a two-piece design with an aluminum center and steel brake track.

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Rounded edges are UCI-compliant and allow for easier wheel installs - Compatible with both road and mountain bike brakes - Includes steel rotor bolts

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

Original equipment pads for no-compromise disc brake performance. - Steel backed organic pad is quiet - Each pad kit includes two pads, a pad spreader spring, guide pin and clip - For use with Level, Level TL, Level T, Level Ultimate, Level TLM (B1, 2020+), DB, Elixir, and 2-Piece Road

SRAM's left-side Rival 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group and offer precise braking and shifting performance. The aluminum brake lever and shift paddle deliver smooth modulation and deft shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. The forged aluminum disc caliper is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races and epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Rival 22 Hydraulics, you'll never go back to rim brakes again! - Hydraulic Fluid Type: DOT - Hydraulic Hose Length: 950 mm - Pad Compound: Organic - Rear Der/Shifter Compatibility: SRAM Exact Actuation - Rotor Included: No

SRAM's Apex Brake Caliper is forged from aluminum for low weight and high strength. SRAM's powerful dual-pivot design offers excellent stopping power and great modulation. You'll appreciate the easy-to-replace cartridge brake pads, and the handy quick release and adjustment barrel too.

Bolt on SRAM's Apex Pad & Holder for excellent braking. The holder design makes it easy to switch pads—meaning this system is great for road and cyclocross bikes alike!

- Parts listed are for servicing and overhauling a single master cylinder/lever assembly

SRAM's Force CX1 Hydraulic Brake and Brake Lever is descended from their top-end RED road group, representing SRAM's attempt at perfecting the interface between cyclocross rider and bike, and maximizing braking performance. Designed for a 1 x 11-speed setup, this left-side, hydraulic-brake-only carbon lever is simple and effective. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust.

The SRAM Level brake levels the playing field with power and reliability stuffed into a lightweight package. This is no-nonsense performer, but don’t let its understated disposition fool you—Level gives you the art of braking in minimalist form.

SRAM's Rival 22 Front Brake Caliper delivers competition-ready speed control, low weight and lovely streamlined aesthetics that will enhance any road bike. Featuring a powerful dual-pivot design and cold-forged-aluminum construction, the Rival brake offers excellent stopping power. You'll appreciate the easy-to-replace cartridge brake pads, the handy quick-release, and adjustment barrel.

We know good value. It comes with practicality. Durability. Sensible design. The Level TLM is that sweet spot—alloy lever blades, DirectLink actuation, DOT 5.1 fluid, and our new two-piston, two-piece caliper—all in a compact, lightweight package. This is the tried-and-true machinery for all-day, never quit performance. - A modern XC brake for the most demanding rides and races - Approachable price for bikes and riders of all levels

For the Ultimate, we held nothing back. Our engineers sculpted the finest materials—titanium and carbon fiber—to make this our lightest four-piston brake ever. Power, modulation, and lever feel set a new standard. Personalization is quick and intuitive. And, for performance—well, our test riders didn't dub it the "Mini-Code" for nothing. - More caliper stiffness and a new pad compound with bite - Pivot bearings for crisp lever feel and a fatigue-free ride - SRAM's best power-to-weight ratio in a four-piston brake

The secret to great fun on any ride is confident and secure braking. Letting it rip where you want, knowing that you can stop when you want. Enter the Apex 1 HYDROR. Using SRAM's proven HYDROR braking system, the Apex 1 delivers quiet confidence on every ride. - Uses DOT 5.1 brake fluid - Lever body design offers excellent finger wrap, comfort, and control - Forged aluminum disc caliper with steel-backed organic pads and steel hardware - Two piston hydraulic caliper - Moto-style means this is a left-side lever with a rear brake, the reverse of the normal American-style. - Front brake hose length is 950mm, rear brake hose length is 1800mm

Wireless shifting and the best hydraulic disc braking anywhere, plus revolutionary eTap shift logic. What more could you want? While we could have stopped there, we went further and optimized the hood shape to fit hands of all sizes for comfortable and controlled braking from any position. AXS technology means personalization is in your hands. - AXS-enabled for easy personalization - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - Optimized hood shape fits a wider range of hand sizes - Textured shift paddles and hoods for control and comfort - Reach Adjust to personalize fit for more hand sizes

Heavyweight performance in a lightweight package. Level TL packs the same XC and trail-optimized power delivery into a brake set that won’t break the bank. This brake matches an alloy DirectLink lever to a lever body that contains the same technology found in the Level TLM, Level Ultimate and Guide series of brakes, for reliability and consistency you can count on.

CenterLine X rotors are the lighter weight version of SRAM's quiet, smooth, and robust CenterLine rotors. The CenterLine X rotor features a two-piece design with an alloy center and steel brake track. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Lightweight, two-piece design - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: 6-bolt - Includes Steel rotor bolts

SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.

Caliper only - does not include lever or hose. - Compatible with all SRAM road hydraulic brake levers - Includes steel-backed organic pads - 18mm Front/Rear - Brake Lever Actuation: Hydraulic - Rotor Included: No - Hydraulic Fluid Type: DOT - Pad Compound: Organic

Guide T brings consistent performance and reliable stopping power thanks to a revised lever design and lightweight four-piston caliper. Featuring SRAM's Directlink lever, updated master cylinder and timing port closure, all combined to provide a more positive braking system. - Bleeding Edge, drip-free bleed port closure and adaptor to minimize fluid loss - Heat Shield technology to reduce caliper fluid temperature and prevent loss of braking power - MatchMaker compatible for a clean and simplified look - Ambidextrous lever mount design - Lightweight 4-piston dual-diameter caliper - Includes steel-backed organic pads - Front includes 950mm hose - Rear includes 1800mm hose

As SRAM’s first direct mount road brake, the S-900 does more than just complete SRAM’s road brake product line. It has a design that delivers great power and superior feel. The design reduces what engineers call “splay force,” sending energy into the brake instead of the frame and fork. This results in a more efficient transfer of energy from lever to rim, making for solid modulation and a snappy return. The brake provides clearance for up to 28c tires and is compatible with all non-hydraulic SRAM road levers, including SRAM RED eTap. - Direct mount (Rear) - Compatible with non-HRD SRAM road shift-brake and brake levers - Sold individually - Front and rear compatible – fork and seat stay mount only - Includes SwissStop Flash Pro Yellow King pads - Solid feel, power, and modulation with a snappy return - Wider clearance for modern wheelsets - Brake type: Mechanical - Pad type: Cartridge - Reach (RB): Standard - Compat - Cable pull: Cantilever/Road - Hardware: Stainless Steel

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: CenterLock - Rotor Type: Centerline

SRAM's right-side Rival 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group offer precise braking performance. The aluminum brake lever and shift paddle deliver smooth modulation and deft shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. SRAM's Rival 22 right shifter is designed to work with a SRAM 11-speed cassette. The forged aluminum disc caliper is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races and epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Rival 22 Hydraulics, you'll never go back to rim brakes again!

The SRAM CenterLine XR (CLX-R) rotor works in tandem with the SRAM eTap AXS drivetrain. It's designed specifically for road riding — and to keep braking quiet at every stop. - Streamlined form optimized for road use - CenterLine track offers quiet brake operation - Two-piece design reduces weight

Level Ultimate is the master of two forces—power and weight—in one sleek, durable design. In this build, we took every gram to task. Carbon-fiber lever blades for crisp, clean pulls. A new two-piece, two-piston caliper for superior heat management and smooth piston actuation. With Ultimate, total control is at your fingertips. - Modern XC power for today's most demanding races - Pivot bearings offer crisp lever feel and a fatigue-free ride - Engineered for easy installation and maintenance

- A mountain bike specific rotor designed to improve brake performance while reducing noise and increasing heat dissipation - New brake track pattern for increased pad traction and recessed spokes with thermal dissipating paint - HS2 is more powerful, and quieter rotor with best-in-class heat management - Hub Compatibility: Center Lock - Disc Material: Steel

As a front lever for your Rival 1 set-up, or paired for single speed adventures, the new Rival brake lever features the same ErgoFit ergonomic design introduced on SRAM RED but delivered in a sleek, forged aluminum offer. SRAM Reach Adjust feature brings near universal fit for riders. - Weight: 260 grams per lever (no cables) - Lever Material: Aluminum - Finish: Black - Adjustment: Reach Adjust

The SRAM CenterLine XR (CLX-R) rotor works in tandem with the SRAM eTap AXS drivetrain. It's designed specifically for road riding — and to keep braking quiet at every stop. - Streamlined form optimized for road use - CenterLine track offers quiet brake operation - Two-piece design reduces weight - Includes stainless steel rotor bolts

Sleek, easy to use, yet immensely powerful. Code R packs a winning punch with a reliable DirectLink lever mated to Code’s new oversized four-piston caliper. SRAM’s signature ergonomics are supplemented by the tool-free reach adjust for a fit to each riders’ needs, to unleash Code’s superior braking power, consistency, and modulation. - Four aluminum pistons provide the stopping power and excellent heat management - Stainless steel heat shield breaks the thermal connection between the brakes pads and the caliper body, which reduces fluid temperature - Forged aluminum lever body and blade - Bleeding Edge design for easier maintenance - Includes steel-backed sintered metal pads