Fenders

The ultimate set of mudguards for fat tire bikes offering all-round mud protection. Front is mounted easily under the down tube by high-performance straps and the rear fits to the seat post in seconds with the proven tool-free SKS quick-release Powerstrap attachment system. The two-hinge arm in the rear allows perfect adjustability to the geometry of your bike.

Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.

SKS's S-Blade rear fender attaches easily to almost any road bike seatpost, protecting you from road spray and letting you ride through the wet.

- Smart clip-on front mudguard for road, cyclocross, hybrid, gravel bikes, etc. - Fits a maximum tyre width up to 38mm. - It is the ideal companion to our S-BLADE rear mudguard. - Its smart, double hinged quick release fitting system also fits aero forks. - Paintwork protection film for the frame is included.

The S-Guard is not just for road bike cyclists; this super-lightweight (24g) and small mudguard protects your bottom from mud and water. Made with super-soft material, it fits on nearly every saddle with the addition of a cable tie.

Functional. Fashionable. Fenders. No one wants that wet stripe on their back. Keep yourself and your gear clean and dry with a stylish fender. Details: - Fenders intended for warranty and service use. - Original equipment replacement fenders for Electra bikes - Color matched for direct compatibility - Sold in pairs - Includes struts

These clip-on fenders are designed specifically for fat bikes. They're extra-long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. - Extra-long and wide to accommodate the biggest tires - Easy to install and fits virtually any bicycle

The X-Board is an innovative clip-on fender with rubber fasteners for downtube mounting. - Adjustable soft rubber cable-spacers, ideal to adapt on almost any tube profile - Robust rubber fasteners - Dual compound-softspoiler

Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.

This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31cm / 12.2" (in length) - Weight: 47g / 1.66oz (FS, on fork)

Turn your mountain bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

If you ride bent, Planet Bike's recumbent fenders keep you covered when Mother Nature rains on your ride. They are designed for non-tradtional bike and trike setups. Their clean lines and rugged aluminum construction provide great protection from rain, road grit, and other tire spray. - 6061 aluminum blades - Stainless steel V-stays and hardware are pre-installed and disc brake compatible - 100mm mudflaps for extended coverage - Release Tabs on front fender for added safety - Eyelets Required?: Yes - Wheel size: 20” - Max tire size: 20" x 1.5" (50mm) / 20" x 1.9" (60mm)

Turn your bike into an all-weather vehicle with Planet Bike's Full Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. Plus the hardware is pre-installed for quick mounting.

The VELOFLEXX mudguard set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. The VELOFLEXX bridge allows the rear mudguard to be attached at the top of the seat stay with the use of rubber straps—no tools needed. This method of mounting doesn't rely on the cross stay where the caliper brake is usually bolted. At the front, the VELOFLEXX is mounted to the fork bridge with a rubberized hook-and-loop fastener or a cable tie. The black-coated stays provide even greater support. - Compatible only with disc brakes - Includes hook-and-loop fasteners and tension rubber - Weight: 580g - Max. outer diameter: 35mm - Wheel size: 27.5" (650B), 28" - Tire width: 52mm - Length, front fender: 680mm - Length, rear fender: 870mm

Planet Bike's Grunge Board is an easy-to-mount front fender that keeps you dry and clean when it's wet and muddy. It's made from a nearly indestructible polymer and it mounts in seconds to your down tube with the 2 rubber straps.

Turn your big-wheeled bike into an all-weather vehicle with the Cascadia 29er Fenders. Made of unbreakable polycarbonate with stainless-steel stays, they're ultra tough. They boast long mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

Functional. Fashionable. Fenders. No one wants that wet stripe on their back. Keep yourself and your gear clean and dry with a stylish fender. Details; - Fenders intended for warranty and service use. - Original equipment replacement fenders for Electra bikes - Color matched for direct compatibility - Sold in pairs - Includes struts

These clip-on fenders are designed specifically for fat bikes. They're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. - Extra-long and wide to accommodate the biggest tires - Easy to install and fits virtually any bicycle - Works with both rigid and suspension forks

Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 26-inch bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.

Keep yourself and your gear clean and dry with a stylish fender. Original equipment replacement fenders for your Powerfly FS. PRODUCT DETAILS - Designed specifically for the 2021 Powerfly FS - Requires specific 2021 Trek Powerfly FS rear rack to mount - Mounting hardware not included - 27.5" & 29" wheel size compatible

Fender set with flexible spoiler It doesn't get any longer than this: The BLUEMELS STYLE mudguard set with a flexible spoiler offers excellent all-round protection against splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the mudguard is extremely robust, rigid and protected against corrosion. New V adapter with ESC security system With its matt black surface and the black fastening components, the BLUEMELS STYLE also leaves nothing to be desired in terms of looks. The newly developed V-adapter with ESC safety system decouples the double U-struts when branches get between the spokes so that the wheel does not lock. Incl. accessories and struts. - Aluminum/plastic sandwich construction - With a flexible spoiler - V-adapter with ESC safety system - Stable double U-struts - Made in Germany