Wheels

- Designed to stabilize 15g spokes in most hub flanges - 1000-pack

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - One 264mm spoke = 6g - Nipples sold separately

Replacement spoke kits for DT Swiss PR1400 wheels. - Includes 6 spokes and 6 nipples

- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

The Trace rear axle fits Race Face wheels equipped with Trace hubs, like the Aeffect Wheelset. Use it as a replacement axle or to convert your wheel to a different axle standard. - Light and strong alloy construction - Compatible with Race Face Trace hub

Hub End Caps for Go-Devil Hubs. Caps for quick release, 12mm, and 15mm available.

HED's entire line of Big Deal fat rims can be purchased as a rim-only for the custom build of your dreams! Big Deal is 445 grams and 85mm-wide of pure fat-bike joy. This one-piece, full-carbon rim will change the way you ride. Big Deal utilizes a ribbed, single-wall design to maximize stiffness and minimize rotational weight…all on a tubeless-ready platform. Compared to most aluminum fat bike wheel/tire combinations in the market today, you can expect to lose 1.5 to 2 pounds… per wheel. Note that the Big Deal is drilled symmetrically ONLY and cannot accommodate offset frames. Big Deal utilizes Inflatobam, HED's patented tubeless technology for installing big tires. The twin channel rim design provides a better pre-inflation seal by trapping each tire bead against the rim. This drastically reduces the amount of air it takes to get the beads to “bam” into place. In conjunction with the rim shape, Inflatobam utilizes Inflatobands. These effectively provide a variable rim-channel diameter. This compensates for the discrepancies in tire bead diameters by minimizing the gap between the tire and the rim channels (the main source of air leaks). Once seated, the angled bead shelf prevents the tire from collapsing back into the rim at low pressure. Our interior surfacing and tight tolerances ensure no tire burp or slip. Also note that our rim shape does not require tire levers to remove and install tires. Inner tubes may be used, too. Additional Info - Rim Type: 85mm - Rim Material: Carbon - Rim Weight: 445g - Color: Twill Weave - Rim Hole Count: 32 - Drill Pattern: Symmetrical Only - Decal Type: White - MIN/MAX TIRE SIZE: 3.8 - 5.0" - Rim ERD: 564 (includes washer)

Replacement Alloy HGR (HG-Road) Freehub Body, with Anti-Bite Technology, for all HEX Rear Hubs. Includes spacer ring to also allow the use of MTB cassettes. Compatible with: - All HEX J-Type, Straightpull, and Gravel rear wheels Not compatible with: - SPIKE/OOZY/SPOON hubs

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Hub Model: E-SYNC - Freehub Body: Shimano HG - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall

Optimize your Zipp wheels with CeramicSpeed Hub Bearings to benefit from reduced friction and increased performance. The result is higher speed with the same effort as well as a higher top speed. CeramicSpeed Wheel Bearings have a proven lifetime, which is 3-5 times longer than standard bearings. All components are optimized for low friction and prolonged lifetime. This wheel kit is compatible with 1st generation non-disc Zipp NSW (before mid-2018). In The Box - 4 x 61803 bearings - 1 x 61903 bearing - 1 x 61804 bearing - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet

These die-cut borderless decals provide a distinctive look to go with the distinctive sound and aero-advantage of Zipp wheels rolling at 45km an hour. Zipp’s Matte white and Matte black decals also are still available. Each decal kit has seven decals sufficient to cover one wheel and two matching valve-hole decals. Note: Before applying the decals, make sure the rim surface is free of dirt and debris. We recommend a gentle wipe with acetone or rubbing alcohol. Peel the white backing sheet from the decal, orientate, position and gently press the decal onto the rim surface. Starting at one end, remove the surface clear cover slip and then work the decal into the dimples using a 3M squeegee.

Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Fully convertible with tool-free end caps - 24, 28 or 32 spoke holes

The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong FULL 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec. Same Clutch coaster hub you’ve come to love, but with a few upgrades. Features: - Maximum strength axle design - Super-durable bearing arrangement throughout - 2.5mm hex key slack adjustment through hub shell access hole. No wheel removal required. - Super-durable drag mechanism design - Crankflip ready Improvements Over the Clutch V1: - 14mm chromoly axle bolts on both the drive and non-drive side for greater reliability - Improved clutch engagement - Improved manufacturing precision throughout - More slack than the V1 hub - All-new durable proprietary plastic spec for the removable hub guard Specs: - 36-hole, 2014-T6 aluminum shell - 9T Driver - Left or right hand drive - 22 oz / 623g Guard Options: - Plastic hub guard included (but optional to use) - Alloy hub guard also available

Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical. We've ridden them on all kinds of bikes from mtb to road and we're in love. They are reliable, dang light and very reasonably priced. We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release, 12mm, and 15mm endcaps are included. On all models we spec high-quality made in Japan stainless-steel sealed bearings. Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity in our modern world. - Weight: Disc Brake: 164g - Includes 12mm, 15mm endcaps and quick release skewer - Non-Drive Side Center To Flange Disc Brake: 21mm - Drive Side Center To Flange Disc Brake: 36mm - Non-Drive Flange Diameter Disc Brake: 58mm - Drive Side Flange Diameter Disc Brake: 45mm

When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.

The DT Swiss 240s MTB Center Lock Front Hub hits the sweet spot between low weight and reliability. With multiple axle options and 6-bolt rotor adapters for the Center Lock spline, you can build up a high-end wheel for nearly any bike. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides.

- Shell: 8mm flanged axle nut - Flanged

- Skewer Trek QR-18 100mm Bolt-On Front Black - Skewer Trek QR-18 135mm Bolt-On Rear Black

Our lightest alloy rim with welded, advanced rim profile! The most advanced alloy existing for rims meets the most advanced rim profile to form the RR 411 rim. From the moment the alloy is melted, all the way to the secret surface treatment, this rim is all about getting the absolute best out of the great, shiny metal that is aluminum. Very light, very strong, and very classy is the result.

Sleeved 25 mm Enduro rim, ready for the rough. Let your muscles play on the uphills and switch to attack mode for the downhills. This is exactly what DT Swiss Enduro rims are made for. Each rim is a piece of high precision engineering and, thanks to the extremely resistant alloy, the E 512 can cope with the most demanding trails.

A 30mm welded Enduro rim developed for the fastest EWS rider. Enduro may be young as a discipline, but at its core is the intrinsic need of riders to ride burlier terrain faster and faster. Something that MTB has been all about since the beginning. The EX 511 rim is the perfect tool for this quest. It comes with all the technology that has delivered many EWS wins and packs it in a 30mm-wide profile, ready to go burlier, faster.

The number to count on—240 with Ratchet EXP. The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.

Track Front Hub - High polish silver aluminum

This rim is your robust and reliable companion for all rides. The R 500 supports your riding, day-in and day-out, over thousands of kilometers, all at an unbeatable price-performance ratio.

The buyer's choice for wheel builders looking to save weight. ProLock nipples contain a special adhesive compound (by Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond. - Weight: starting at 20g for 64 nipples

Direct power transmission in every riding situation—240 with Ratchet EXP. With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.

Sleeved 25mm Enduro rim, ready for the rough. Let your muscles play on the uphills and switch to attack mode for the downhills. This is exactly what DT Swiss Enduro rims are made for. Each rim is a piece of high precision engineering and, thanks to the extremely resistant alloy, the E 512 can cope with the most demanding trails.

Made for the biggest tires, the cutouts keep the weight low. Fat bike rims must be strong, stable, and lightweight yet be able to accommodate very large tires. The BR 710 rims from DT Swiss meet all of these requirements by using specially designed rim profiles, sophisticated cutouts, and an extra-strong alloy. - Net Weight: 675g - Recommended system weight max.: 130kg - ASTM classification: 3 - Material: Aluminum - Rim Joint: Welded - Tire Interface: Crotched/Clincher non-tubeless - Brake Interface: Disc - Rim Diameter: 26" - Reference Diameter ERD: 549mm - Inner Width: 76mm - Outer Width: 81mm - Rim Height: 16mm - Spoke Bore Rim: Non-eyelet - Valve Hole: Presta