Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Chainrings

$881.00
- AXS enabled for easy monitoring and firmware upgrades
- Fully integrated power meter into a direct mount chainring
- Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride
- Power balance measures left and right legs separately
- SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control
- Laser-etched chainring finish is more durable
- 8-bolt direct mount compatibility only to RED and Force eTap AXS cranks.
- Speeds: 12
- Chainring material: Aluminum
- Power Meter Type: ANT USB

$19.00 - $165.00
Shimano Ultegra 6800 11-Speed Inner Chainrings
- Material: Aluminum
- Ring Position/Type: Inner

$71.95
Designed for 104 BCD Mountain Cranksets. The proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the benefits of an oval ring without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention.
- The simplest way to explain the way these rings feel is having 2 teeth less in the weak part of your pedal stroke and 2 teeth more where you have the most power
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Made from 7075-T6 aluminum for long life
- These rings are threaded, use with 10mm chainring bolts
- 48mm - 50mm chainline depending on the crankset

$81.95
More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth PowerTrac Elliptical (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112 degree) than competitors versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings.
Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability.
Compatibility
- These rings fit on the Shimano XT M8000, SLX M7000, Deore M6000, or FC MT5100 1x or 2x cranksets.
- Use only the stock Shimano XT M8000 or SLX M7000 chainring bolts
- These CAN be mounted to the XTR 9000 series cranks, but you will have to use the bolt caps that come with that crankset and you will need to file roughly 1mm off the threaded boss on each bolt cap (they are a little too long and don't allow the ring to be tightened down).
- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
- Provide a great chainline on most boost bikes
- Must use the stock chainring bolts. The Wolf Tooth chainring bolts are a different size.
- Ovality of 10% and timing of 112 degree after TDC (top dead center)
- Maximum diameter is that of a chainring 2t bigger than the size you order so be sure there is adequate chainstay clearance.
Specifications:
- Chainline: 49mm
- Boost Crankset Chainline: 52mm
- Mount type: 96 BCD for Shimano M8000 and M7000
- Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains

$79.95
These Wolf Tooth Elliptical Direct Mount Chainrings are designed to work with Cane Creek eeWings cranksets and SRAM direct mount cranksets with a 3-bolt interface. The proprietary Powertrac design has an ovality of 10% and a timing of 112 degrees after top dead center, providing benefits such as greater rear wheel traction. The tooth profile was developed specifically for Shimano's XTR, XT, and SLX 12-speed Hyperglide+ chain.
- Nickel plated chainrings are designed to be compatible with Cane Creek eeWings cranksets
- Compatible with Shimano 12-speed Hyperglide+ chains on bikes with boost and non-boost spacing
- Elliptical rings provide smoother, more efficient pedal rotation, which means better traction

$69.95 - $81.95
Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention.
- Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Made from 7075-T6 aluminum for long life
- Use of a clutch-style rear derailleur is recommended
- 52mm chainline / 3mm offset for boost spacing

$79.95
Designed to fit Shimano 4-arm 96 Asymmetric BCD XT M8000, SLX M7000, or Deore M6000 1x or 2x cranksets. These rings feature Drop-Stop tooth profiles for mud clearance, chain retention and durability.
- Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Made from 7075 Aluminum for long life
- Use of a clutch-style rear derailleur is recommended

$54.95
This chainring's tooth profile was developed specifically for Shimano's XTR, XT, and SLX 12-speed Hyperglide+ chain.
- Compatible only with Hyperglide+ 12-speed chain
- For use with Wolf Tooth CAMO spiders (not compatible with any other chainring mountings)
- Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention
- Prevents premature ring and chain wear that can come from non-optimized profiles

$79.95
This chainring's tooth profile was developed specifically for Shimano's XTR, XT, and SLX 12-speed Hyperglide+ chain.
- Compatible only with Hyperglide+ chains
- Engineered proprietary tooth profile maintains the quiet and smooth performance of the HG+ drivetrain with optimal chain retention
- Prevents premature ring and chain wear that can come from non-optimized profiles
- Chainrings fit on the Shimano XTR M9000 and M9020 1x or 2x cranksets
- Use only the stock Shimano XTR chainring bolts (M7)
- Made from 7075-T6 aluminum for long life
- Use of a clutch-style rear derailleur is recommended

$76.95
These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch rings feature a our patented Drop-Stop design for the best wear life, chain retention and mud clearance. We have both Boost and standard chainrings. - CNC machined aluminum ring fits Race Face cranks with Cinch System - Features Drop-Stop tooth design to prevent unwanted chain drop - Asymmetrical tooth shape for the best wear life, chain retention and mud clearance - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy

$79.95 - $89.95
The perfect 1x solution for your gravel, CX or road bike. Made from 7075 Aluminum, Wolf Tooth's patented Drop-Stop design helps clear mud while retaining your chain.
- Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Not compatible with Shimano Asymmetric 110 BCD cranks or Campagnolo CX10/11 cranks
- Use of a clutch-style rear derailleur is recommended
- Made from 7075-T6 aluminum for long life

$84.95
120 BCD cranksets were introduced with SRAM 2x10 drivetrains and are excellent candidates for a 1x conversion with our patented Drop-Stop chainrings. These rings will allow you to convert your 120 BCD crankset, like the SRAM XX and others, to a 1x application! Compatibility: - These rings fit any 120 BCD crankset or spider. - For SRAM cranksets you must use the stock M8.5 bolts. These are not standard bolts and Wolf Tooth's bolts will not work with this chainring. Note that only about 3 threads will engage (same with the stock SRAM rings) - For the 36t chainring and non-SRAM cranksets you will need the M8.5 bolts from Wickwerks if your crankset doesn't already have them. These bolts actually have more threads engaged and will work better than the SRAM ones. - 36t is the smallest number of teeth that fits on a 120 BCD - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).

$15.00
- DualHex kits: 5mm-broach bolts with 6mm-broach nuts for secure 2-wrench assembly
- Triple kit can be used on 5-arm or 4-arm mountain/road cranks (includes 5 inner chainring bolts in addition to middle/outer bolt/nut set)

$79.95
- Fits asymmetrical 96mm BCD with built-in threaded standoffs - Used on Shimano XTR M9000 and M9020 crankset (both race and trail models)
- Features Drop-Stop tooth design to prevent unwanted chain drop
- Mount using the stock Shimano XTR M7 chainring bolts
- 49mm chainline for 28-34 tooth and 50mm for 36 tooth
- Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain)
- Made in the USA from 7075-T6 aluminum alloy - 41g (30t)

$89.99
The Wolf Tooth 110 BCD Asymmetric Chainrings are designed for use with Shimano GRX cranks. Chainrings feature Wolf Tooth's patented Drop-Stop design for the best wear life, chain retention, and mud clearance.
- Compatible with Shimano GRX cranksets including RX600 and RX810
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Use of a clutch-style rear derailleur is recommended
- Made from 7075-T6 aluminum for long life

$79.95 - $89.95
The perfect 1x solution for your gravel, CX or road bike. Made from 7075 Aluminum, Wolf Tooth's patented Drop-Stop design helps clear mud while retaining your chain.
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Not compatible with Shimano Asymmetric 110 BCD Cranks or Campagnolo CX10/11 cranks
- Made from 7075-T6 aluminum for long life
- Use of a clutch-style rear derailleur is recommended

$76.95
Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the benefits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings.
- Elliptical rings provide smoother, more efficient pedal rotation, which means better traction
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Not compatible with the SRAM RED and Force AXS 8-bolt interface
- Made from 7075-T6 aluminum for long life
- Use of a clutch-style rear derailleur is recommended
- 3mm offset is designed for boost cranksets (52mm chainline)

$69.95
The Wolf Tooth 76 BCD chainrings fit any SRAM 76 BCD spider or Specialized Stout crankset.
- Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Made from 7075-T6 aluminum for long life

$83.99
absoluteBLACK Oval Direct Mount 1x Chainrings for CINCH greatly improve traction and climbing abilities. They are designed for Race Face cranks that utilize the CINCH system. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center).
- Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding
- The unique, patent-pending narrow-wide tooth profile keeps the chain in place
- Teeth have been 3D-machined for ultimate mud shedding and quieter operation
- Provides excellent weight-to-strength ratio
- 6mm offset for standard 49mm chainline

$99.99
absoluteBLACK Oval 110 BCD 1x Chainrings for gravel greatly improve traction for gravel or road 1x setups. They are designed for all Shimano 4-bolt cranks such as Dura-Ace 9100, 9000, Ultegra 8000, 6800, and more. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.5-11.4%, with timing of 112-113° after TDC (top dead center).
- Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding
- Teeth have been 3D-machined for ultimate mud shedding and quieter operation
- The unique, patent-pending narrow-wide tooth profile keeps the chain in place
- Provides excellent weight-to-strength ratio
- 12-Speed Eagle compatible
- Chainring has 1.5mm offset toward frame to provide the perfect chainline
- Chainring bolts are included

$69.95 - $81.95
Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention.
- Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Made from 7075-T6 aluminum for long life
- Use of a clutch-style rear derailleur is recommended
- 52mm chainline / 3mm offset for boost spacing

$64.99 - $69.99
Narrow wide chainrings compatible with Race Face CINCH system cranks. Direct mounting allows an easy switch between rings and spiders.
- Compatible with 9, 10, 11, and 12 speed
- Narrow Wide tooth profiling ensures consistent chain retention
- Lockring installed/removed with ISIS BB tool
- Stiff 4mm plate thickness to transfer loads without flexing

$21.00
The SRAM X-Sync STEEL 1x chainrings are the perfect replacement ring for the cost conscious with added durability of steel. The same SRAM X-SYNC technology at a price well below competitors’ imitation “narrow wide” rings. Best performing chainrings at the best price.
- Drivetrain Speeds: 10 , 11
- Material: Steel
- Ring Position/Type: Single
- Weight: 110 grams (32t), 96 grams (30t),

$99.00
SRAM's X-Sync Road Chainrings are designed for provide maximum control when used with AXS road cranksets.
- SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control
- Laser-etched chainring finish is more durable
- X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear
- Can be installed with a single tool, making gearing changes a breeze

$238.00 - $343.00
Shimano Dura-Ace 9000 11-Speed Chainrings.
- Chainring BCD: 110 Shimano Asymmetric
- Color: Silver/Black
- Defined Color: Silver
- Drivetrain Speeds: 11
- Material: Aluminum
- Ring Position/Type: Outer

$18.00 - $92.00
- Drivetrain Speeds: 11
- Chainring BCD: 110 Shimano Asymmetric
- Material: Aluminum

$149.99
Shimano XTR CRM91 1x11 Chainrings
- Hollowglide technology provides exceptional driving stiffness and strength
- Titanium, carbon, and aluminum materials
- Titanium teeth for lightweight durability
- Modified tooth profile prevents chain drop
- Ring Position/Type: Chain-retaining single ring
- Drivetrain Speeds: 11
- Chainring BCD: 96 Shimano Asymmetric

$64.99
The Shimano Deore XT SM-CRM85 chainring is designed for use with Shimano's M8100 and M8130 1x cranksets.
- Special MTB gear tooth profile with Dynamic Chain Engagement+ improves chain engagement and retention
- Direct Mount Type: Direct Mount Shimano
- Tooth Count: 28T, 30T, 36T
- Drivetrain Speeds: 12
- Defined Color: Black
- Ring Position/Type: Chain-Retaining Single Ring
- Round or Oval: Round
- Chainline/Hub Compatibility: 141/148 Boost Hubs , 157 Super Boost Hubs

$52.99
Get your bike back on the road with new chainrings.
- Original 42-tooth gearing
- Includes lockring
Specifications:
- Size: 42t, Direct mount
- Speed: 1
- Material: Steel
Page 1 of 8
Next page