Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Pedals

$179.99
Low And Lean Made from super-strong 6061-T1 aluminum, the double concave body is sleek and light while still giving your foot a nice wide platform to stand on. Round And Round We Go Fully sealed 4-bearing design makes for smooth rolling rotations over an extremely long life. And the ability to rebuild makes it nearly unkillable. Ride Don't Slide Pins at the front and back of the pedal are angled slightly to provide improved traction and foot comfort. Because pedal bites suck. Look Good Ride Good Our top of the line pedals come in 6 different colors so that you can add as much flavor and flair to your ride as you like. Pedal Envy More than just a trusty platform for stomping landings and railing around berms, the Atlas Pedal has long been Race Face's top contender. It's strong, thin, concave, lightweight, rebuildable, and ideally suited for getting wild in the woods. Specs: - Axle Material: Chromoly Steel - Body Material: 6061 Aluminum - Material: 6061 Aluminum - Platform Height (MM):14.5 - # of Pins: 20 SHCS hex traction pins per pedal (10 per side) - Platform L x W (MM): 114 x 101 - Weight: 355g
$59.99
- 100% SDG DNA in the design of these pedals - Utilizes a flat profile which allows optimal grip for flat pedal shoes - Composite body design - Minimal 17mm pedal body height maximizes the pedal feel - 105mm x 110mm Platform - Ramped and undercut traction pad - 18 pins, replaceable, bottom loaded - Bearing/bushing design for maximum durability. Fully rebuildable pedal design - Cro-Mo axle
$75.00
LOOK Trail Grip pedals with Activ Grip by Vibram rewrite performance and personality rules for off-road riding. Unique, mountain peak-evolved, composite stud and rubber lug tread inserts give brilliant bike control and slip free security without trashing your shoes or your shins. Race-bred bearings and four switchable colors deliver smooth style. - Technology: Flat pedals + LOOK Activ Grip by Vibram - Body: Composite - Traction: Vulcanized Rubber Activ Grip + Composite studs - Spindle: Chromoly+ - Surface area: 107x103mm - Weight (pedal): 265g - Weight (pair): 530g
$150.00 - $179.99
Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity. Specifications: - spindle material: forged scm 435 chromoly steel - body material: forged 6061-T6 - inner bearing type: igus LL-glide bearing - outer bearing type: igus LL-glide bearing - footprint: 100mm x 100mm (small) / 114mm x 111mm (large) - adjustable pins: 10 per side - minimal profile: 11mm-13mm thin - stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - weight: 375g per pair (small) / 405g per pair (large)
$34.99 - $39.99
The RaceFace Ride pedal features a slim nylon-composite platform, and offers a concave and lightweight design for legitimate performance. - Molded traction pins give you all the grip you need without risk of damaging your shoes or shins - Durable Cro-Mo steel axle features a standard 9/16” pedal thread and serviceable internal parts - 9/16"
$57.00
Get connected to your daily ride with MSW's MP-100 Dual-Sided Clipless Pedals. They feature dual-sided entry so clipping in quickly is a snap, and the adjustable spring tension lets you customize exactly how much force it takes to unclip. These no-nonsense pedals are stellar in all conditions, and when the going gets sloppy, the mud-shedding design ensures you can still get in and out of your pedals quickly and easily.
$44.99
Odyssey JC/PC Pedals are designed with replaceable pedal bodies, pins, and nuts. - No bearings, adjustable bushing tension - Two-piece plastic bodies with replaceable metal pins and CroMoly spindles
$165.00
Riding in deep, sticky snow just got a whole lot easier. 45NRTH's Helva pedals feature an open CNC-forged body that excels at shedding snow. Its super thin 9mm profile gives you maximum clearance while cornering and riding in deep ruts, plus they're light. Sealed DU bearings keep these pedals spinning smooth. - Size: 110mm wide x 100mm long x 9mm high - Spindle diameter: 9/16-inch - Weight: 308 grams
$149.99
Dual-sided, SPD-compatible clipless MTB pedals with lightweight composite body for the fastest racers CLIP INTO SPEED With a lightweight composite body to help you fly up the hills, Kovee Pro Clipless Pedals deliver the control, confidence, and efficiency you crave from pedals. When weight and efficiency matters most, reach for Kovee Pro. PRODUCT DETAILS - Dual-sided, SPD-compatible XC MTB clipless pedals - Fully adjustable clip in & clip out tension - Lightweight composite body with knurling for added grip - Dual sealed ball bearings with chromoly spindles for smooth spinning durability - Install direction & torque spec listed on spindle - Includes cleats and mounting hardware
$99.99
Crank Brothers' most versatile pedal. The Candy excels at it all—cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. Specs: - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 355g per pair - Warranty: 5 years
$66.50
Sometimes you wear mountain bike shoes; sometimes you wear sneakers. MSW's CP-200 Platform and Clipless Pedals have you covered, whatever your footwear. These versatile pedals feature a wide, stable platform on one side and an SPD-style clipless entry on the other. Adjustable spring tension on the clipless side lets you customize how much pressure it takes to unclip, while sealed bearings keep you spinning smoothly for endless miles. And, the pedals are rebuildable to further maximize their lifespan.
$135.00
Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedaling.
$30.00
Dimension Combo Pedal Sets are assembled with size large toe clips, straps and reflectors. - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 475g
$34.99
Confident and durable The versatile Line Comp Flat Pedal is built from durable nylon for a solid platform with integrated traction, so every time you place your foot on your pedal your shoe stays put. Line Comp is strong enough to use on your mountain bike, but also at home on your city or commuter bike. A durable frame and solid axle with sealed cartridge bearings ensure lasting performance. Versatile flat pedals with a durable nylon body and forgiving traction tread that delivers consistent, confident grip. - Durable nylon body with a proven shape for comfort and confidence - Sturdy axle boosts durability and spins smoothly on sealed cartridge bearings - Nylon traction pins provide forgiving, confident traction - Simple to install with either 6mm hex or standard 15mm pedal wrench
$89.99
You've got flat shoes and shoes with cleats. Are you really gonna let your pedals tell you which ones you can wear? Crank Brothers' hybrid-style Double Shot is a flat and clipless pedal to suit your every pedaling whim. Molded pins and ribs offer superior grip, and diamond plate pads are supremely tactile. You've got entry from either side of the pedal, so that's two chances per revolution to catch. Thanks to the wide, platform-style body, though, you'll keep moving even if you don't. Specifications: - spindle material: forged scm 435 chromoly steel - body material: A380 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - cleat: premium brass cleats with shims included - weight: 395g per pair
$135.00
Minimal & lightweight for xc/trail riding. 4-sided entry enables superior mud shedding, and customizable float and release angles create a dialed-in feel. Specs: Spindle material: Forged SCM 435 chromoly steel Body material: Cast stainless steel Wing material: 17-4PH stainless Spring material: 300 series stainless steel Release angle: 15° / 20° Q-factor: 52mm Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Cleat: Premium brass cleats with shims included Weight: 280g per pair Warranty: 5 years
$169.00
The ultimate pedal for enduro riding and racing, with a longer spindle. - Concave platform for secure foothold - 6 adjustable pins per side for grip - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for increased shoe clearance and control - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system - Adjustable Pins: 6 per side - Body Material: 6061-T6 aluminum - Cleats: Premium brass cleats with shims included - Endcap: Hex alloy - Inner Bearing Type: Igus LL-glide bearing - Max Rider Weight: No restriction - Outer Bearing Type: Enduro cartridge bearing - Q-factor: 57mm - Release Angle: 15° / 20° - Spindle Material: Forged scm 435 chromoly steel - Spring Material: 300 series stainless steel - Warranty: 5 years - Weight: 424g per pair - Wing Material: 17-4PH stainless
$37.00
Dimension Combo Pedal Sets are assembled with size large toe clips, straps and reflectors. - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 520g
$52.25
Different rides call for different footwear, which is why MSW's CP-100 Platform and Clipless pedals accommodate any shoes you've got. On one side, you've got a stable, wide platform to accommodate street shoes, and on the other, you've got an SPD-style clipless pedal that accommodates your favorite mountain bike shoes. The spring tension on the clipless side is adjustable so you can customize how much pressure it takes to unclip. On the trail or on the pavement, the CP-100 is a versatile, stable platform.
$50.00
PA12A pedals feature a reinforced nylon composite body with replaceable grip pins and CNC machined chromoly spindle. - 2 x sealed bearings and DU bushings - Replaceable grip pins - Dimensions: 100 x 95 x 18 mm
$44.99
MSW Thump composite pedals feature a concave shape and tall pins to provide a "just-right" amount of traction--enough for the rigors of riding off-road--but with in-mold nylon pins to keep calves laceration-free on more casual rides. Balance doesn’t have to mean boring! - Tough nylon composite body with in-mold pins - Chromoly steel, 9/16” spindles, sealed cartridge bearings and nylon bushings - Platform size = 118 x 99 x 19 mm - Body: 18.5 mm thick with 2.5 mm of concavity for great control and comfort - Black - Made in Taiwan
$89.99
There’s no need to choose between clipless performance and platform versatility with the MSW Flip II. Riders can go clipless on the commute or sport clogs on campus. Enhance your ride time with pedals that don’t set limits on your horizon. - Wear 2-bolt style cycling shoes or casual flat shoes - Single side clipless with platform - Chromoly steel, 9/16” spindle, bushing & bearing configuration - Spindle length: 58.5 mm - SPD-compatible 2-bolt cleats included, 4° float, 14.6 angle of release - Adjustable spring tension with tension indicator - Aluminum pedal body - Black
$114.99
- Crank Boot Compatible Axles - Full Anodized Finish - 12mm Thin—Massive 11x11cm Platform - Cold Forged Alloy Pedal Body - Hollow Taper Scandium Enriched Steel Axle - Chamfered Leading Edges for Improved Clearance and Reduced Impact Forces - Chamfered Side Edges for Improved Cornering Clearance - Oversized Sealed Full Compliment Inboard Industrial Bearing - Sealed Outboard IGUS Bushing - 18 Adjustable Pins per Pedal - CNC Optimized, Full Sized Hex Head, Rear Loading Pins Improve Durability and Maintenence - Inboard Friction Seal Prevents Contamination and Reduces Unwanted Pedal Spin
$199.95
Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. They are engineered to lock in your foot with a shape that matches your shoe, rear-loading pins for grip, and a dual-concave profile to further cradle your feet. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform shaped to match the footprint of your shoe. Large is 112mm x 106mm, small is 105mm x 99mm. Dual-Concave Profile: - Waveform pedals are 14mm thick on the perimeter and just 12.5mm thick in the center. This profile cradles your foot, front to back and side to side. Extra Grip: - Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. An additional six pins ship with each set of pedals and they are available as replacement parts. Shaped with Purpose: - The shape of Waveform Aluminum Pedals matches the footprint of your shoe Reliable Performance: - Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions. Tapered Edges: - Large, tapered leading edge to deflect pedal strikes on rocky, rooty terrain Two sizes: - Large: 112mm x 106mm - 384g - Small: 105mm x 99mm - 373g Each size is proportionally scaled to match the silhouette of your shoe based on foot size or pedal size preference.
$124.99
The new OOZY Reboot Pedal - 100% the same award-winning OOZY Pedal platform that SPANK Industries has been manufacturing for years, but now with crank boot compatible axle and fresh new full colour anodized finishes for 2021. - Super slim 12mm for maximized pedal clearance - CNC weight-optimized trail pedal at 360g per set - Forged alloy body is shot-peened and anodized for increased durability - Equipped with hollow taper Chromoly steel axles for unmatched strength - Sealed bearings and IGUS bushings - 18 preassembled pins in virtual concavity for ultimate grip - Recommended for: ASTM 5, All mountain, enduro, trail, E-Bike - Crank boots compatible axle
$19.99
One of the most successful and popular pedals, and for good reason. The original Twisted PC is extremely simple, lightweight, inexpensive, and famously durable plastic-bodied design. Often duplicated but never replicated. Features: - High-strength nylon composite - 16 pins per side - Traditional looseball bearings - Chromoly spindle Specs: - Width: 98mm - Length: 89mm
$62.95
The Fyxation Mesa MP (metal replaceable pins) is a wide bodied nylon pedal that's great for any environment and built to take abuse. Smooth running sealed bearings, DU bushings, chromoly spindle, and an impact grade nylon body, make these the ideal pedals for dirt, snow, sand, and street. - High impact nylon body built to take abuse - Smooth running sealed bearing and DU bushing with chromoly spindle - Replaceable steel pins for added grip (extra replacement pins included with each set) - Weighs in at 351 grams per pair with pedal height of 14mm - Extra wide 105mm platform great for dirt, snow, sand or street
$129.99
The Best Of Both Metals The Aeffect pairs a thin, lightweight 6061-TI aluminum body with a cro-mo axel that runs our tried and true bearing and bushing set-up. Surefooted As A Mule You want traction? You got it. Bottom loading hex-head threaded pins give you all the bite and foot security you need. Your True Colors Shining Through Pick from three vibrant colors to compliment your build and your personal sense of style. Just don't choose wrong or they'll make fun of you. Get Up Stand Up Like a good trail dog, the Aeffect Pedal is most in its element on a flowy section of backwoods Nirvana. Designed with a smaller body, this strong, durable, rebuildable pedal is made to chase stoke all day long. Specs: - Axle Material: Chromoly Steel - Body Material: 6061 Aluminum - Material: 6061 Aluminum - Platform Height (MM):16.9 - # of Pins: 20 SHCS hex traction pins per pedal (10 per side) - Platform L x W (MM): 101 x 100 - Weight: 375g
$19.99
The Tom Dugan signature Grandstand pedals feature a slim design to keep feet close to the axle, dual concave and a wider platform. - 17mm thick at center - 105mm wide - Full Size 14mm heat-treated axle with 17mm wrench flats and 6mm broach
$111.00
The KEO 2 MAX pedal is an excellent example of LOOK's design experience. With its wide contact area and composite body, it offers state-of-the-art technology for full power transfer, in an affordable package. - Technology: Spring - Cleats: Keo Grip - Retention: 8 to 12 - Body: Composite - Spindle: Chromoly+ - Platform material: Stainless Steel - Platform area: 500mm² - Platform width: 50mm - Q Factor: 53mm - Stack height + cleats: 17.3mm (11 + 6.3mm) - Weight (pedal): 130g - Weight (pair + cleats): 328g
Page 1 of 3 Next page