Lubes/Cleaners

Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in Park's CM-5.2 Cyclone Chain Scrubber or as a general purpose degreaser. It won't harm alloy, plastic, or rubber parts. Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush. 16-ounce bottle

Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.

Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.

Recommended by DT Swiss for lubrication of Ratchet mechanisms found in DT's Ratchet, Ratchet EXP and Ratchet LN hubs

Finish Line® 1-Step™ is perfect for commuters and recreational cyclists seeking a quick and easy clean and lube solution. 1-Step™ loosens and removes surface grime, before leaving behind a clean, low-friction film of high-performance lubricant. 1-Step Cleaner & Lubricant helps prevent premature component wear, reduces pedaling friction, and eliminates drivetrain noise. It’s formulated with corrosion inhibitors that provide excellent rust protection in extreme conditions and coastal salt-air. 1-Step™ does not compromise on its ability to reduce pedaling friction over long intervals. • Fast and easy application • Cleans and lubricates chains in one simple step • Penetrates to flush out old lube and contaminants • Leaves behind a low-friction film of high-performance lubricant • Reduces friction, prevents chain wear, protects components • Can be applied to both clean or dirty bicycle chains • Provides maximum rust protection, even in salt-air • Ideal for commuters and cyclists on the go • Apply to bicycle chains before putting into storage

Chill Zone™ is arguably the industry's most advanced rust-busting penetrating lubricant. It simply works like magic! Before giving up on a frozen crank bolt, a rusted derailleur spring, a seized seat post, or discarding your rusted chain, give Chill Zone™ a shot. Bike parts that normally need to be replaced can be reconditioned to ride another day. A special refrigerant propellant freezes metal to as low as -50°F/-45°C. This causes contraction of the metal and creates micro-cracks in the corrosion and galvanically fused metal parts. A penetrating release agent then breaks down and flushes out the rust. With Chill Zone, most seized parts regain full functionality.

Finish Line® Dry Lube is the bicycle industry's original and most versatile dry-style chain lubricant. It is formulated with high-performing nano-ceramic boron nitride. This Non-Stick Ceramic Technology is 100% fluoro-free and sets up with a dry ‘wax-like’ film. It attracts less grime and delivers a low coefficient of friction over long re-lubrication intervals. It is ideal for riding on or off-road, in dry, dirty, dusty environments, and also holds up well in wet conditions. Designed for chain applications, it can also be used on derailleurs, shifters, cables, and brake pivot points. Dry Lube delivers optimum drivetrain efficiency without attracting excessive amounts of abrasive contaminants. • Formulated with Non-Stick Ceramic Technology • Lowers friction, improves pedaling efficiency, reduces wear • Quickly sets up dry and clean • Minimizes the attraction of abrasive contaminants • Low surface tension easily penetrates chain pins • Biodegradable and 100% fluoro-free

A proprietary ceramic formulation containing integral Boron Nitride compounds for low friction in wet and harsh conditions. Formulated with unique eBike specific lubricity pack to handle the higher-torque loads of an eBike drivetrain. Ideal for: Chains, cables, shifters, derailleurs & pedals. - Specifically designed for the hi-torque loads applied to an eBike chain - Creates a ceramic coating for incredible durability and long-distance performance - Contains Boron Nitride compounds - Ceramic compounds provide ultra-low friction for excellent efficiency - Waterproof - excels in wet conditions - Readily biodegradable - Ideal for road and off-road - Integral UV tracer dye - aids a

Rain, sleet, hail, snow, no matter what form it comes in, water can reek havoc on your drivetrain. Fortunately, White Lightning's Wet Ride is designed to meet the demands of riders who traverse soggy terrain and ultra-long distances. This heavy bodied lube is made of premium synthetic oils and water-repelling polymers so it's 100% waterproof and unwaveringly durable. Dirt loving riders will appreciate how well it counteracts the effects of mud and every cyclist will appreciate the anti-corrosion additives that even protect during wet, winter commuting.

High performance suspension fluid formulated to provide fade-free performance. Proprietary additive eliminates stiction, friction and wear, and protects against foaming, seal-swell, oxidation and corrosion.

Reach for Finish Line's Citrus Degreaser when you've got tough grit and grime to cut through. Your parts clean up fast and then rinse residue-free with water. This degreaser is concentrated and water soluble so you can dilute it with up to 25 parts water for less difficult jobs. It's 100% biodegradable and completely non-toxic, too.

The industry's original and most versatile dry-style bicycle lubricant is now formulated with high-performing nano-ceramic boron nitride. This Non-Stick Ceramic Technology is 100% fluoro-free, sets up with a dry ‘wax-like’ film, attracts less dirt and grime, and delivers a low coefficient of friction over long re-lubrication intervals. Dry Lube is especially recommended for riding on or off-road in dry, dirty, dusty environments, yet it holds up well in moderately wet conditions. Dry Lube can also be used on derailleurs, shifters, cables, and brake pivot points. Finish Line's Dry Lube provides optimum drivetrain efficiency without attracting an excessive amount of abrasive contaminants. Features: - Formulated with Non-Stick Ceramic Technology - Quickly sets up dry and clean - Low surface tension - 100% Fluoro-free Benefits: - Lowers friction, improves pedaling efficiency, and reduces wear - Minimizes the attraction of abrasive contaminants - Easily penetrates chain pins and coats pivot points - Meets the highest standards of biodegradability

Finish Line's E-Shift Groupset Cleaner is specially formulated to keep your sensitive and expensive electronic drivetrain clean and safe. It quickly and safely removes grit, grime and moisture from electric shifting drivetrain components, including the front and rear derailleur, derailleur pulleys, chain, cassette and even the crankset. E-Shift is safe and will not harm the wires or electronics. Plus, it dries in minutes leaving the drivetrain parts clean, and with no rinsing required.

Finish Line® Speed Degreaser™ is the fastest way to clean a bicycle drivetrain. Dry-degreasing technology requires no water rinsing as it evaporates rapidly after application to leave no residue. It's innovative turbo sprayer uses mechanical agitation to blast away contaminants from metal components. Speed™ is formulated with advanced solvents to quickly breakdown grease, grime, dust, and dirt. For most applications Speed™ requires no additional brushes or tools. Speed™ leaves no residue so lubricants can be applied to the chain immediately after application. • Dry-degreasing technology requires no water rinsing • Innovative turbo-sprayer blasts away contaminants • Advanced solvents breakdown grease and grime • Dries rapidly to leave no residue • Leaves bicycle chains clean and ready for fresh lubrication

Finish Line® Super Bike Wash™ is ready to use and requires no water rinsing. It quickly cleans dirt, dust, clay, grime, chain soils, nutritional residues, and winter storage grunge off all surfaces of your bike. Super Bike Wash™ uses state of the art, eco-friendly cleaning agents that work together to create a high speed cleaning system. It requires little to no scrubbing. Super Bike Wash™ is non-toxic and meets the highest readily biodegradable standards. It can be safely used indoors or outdoors. Super Bike Wash™ can be used two ways: spray on and wipe off, or spray on and hose off. It is strong enough to remove surface grime from the drivetrain, and safe enough to remove grime build up on frames, saddles, brakes, and handlebar tape. It is safe for use on carbon fiber, titanium, aluminum, steel, and clear coat. • Ready to use with no water rinsing required • Safe for use on all surfaces and paint finishes • 100% readily biodegradable and non-toxic • State of the art cleaning agents remove dirt and grime • Superior rust inhibitors protect metal parts after application • Also available as a concentrate

Smartphones are proven to be 7 times dirtier than a toilet seat! That's where the Muc-Off Antimicrobial Screen & Device Cleaning Kit comes in, to help keep bad bacteria away. Each kit has a premium antimicrobial cloth that has been specifically designed to clean delicate finishes. The pack also includes a 32ml Device Cleaner spray bottle containing an advanced pH balanced, eco-friendly cleaning formula that gives a streak-free finish. - Formulated using deionized water and is pH neutral - Antimicrobial treatment includes silver ions to kill 99.9% of bacteria (fights bacteria, mold and fungi - Anti-odor cloth that stays fresh - Fast acting, eliminates 99.9% of bacteria in less than an hour - Cloth is Machine-washable and effective through as many as 100 washes

Bike Protect is the ultimate liquid bicycle protection. Preserve and freshen your bike with Bike Protect's incredible water dispersing action! It's a perfect 'all over', after-wash corrosion inhibitor due to its extremely high oil content. This increased oil content creates the finest bike protection spray on the market. It drives out moisture and leaves a sparkling, non-sticky protective layer on your frame, drive chain, metal parts, and paintwork. It's ideal to spray onto your chain to drive out moisture before you apply any of the brilliant Muc-Off chain lubes. Bike Protect doesn't just disperse water after you've given your bike a good clean. It also prevents dirt adhesion between washes and reduces future maintenance time as well as helping reduce friction, wear, and energy consumption. - High performance formula leaves dry, non-sticky, protective film - Safe on frame, metal parts, plastics, rubber, paint, and carbon fiber - Drives out excess moisture - Prevents dirt adhesion - Light lubricant coats moving parts - Quick and easy to use - Aerosol Spray - Ideal for Road Cycling, Cyclocross, MTB, & Fat Bikes - Provides the ultimate performance in freezing conditions - For chains, cables, shifters, derailleurs, pedals, & cleats - Incredible durability - Pipette system for easy application

- Creates a dry ceramic coating for increased durability and performance in dry condition - Excels in dry and dusty conditions - Biodegradable - Integral UV tracer dye and UV torch to aid accurate application and ensure total protection

- Creates a ceramic coating for incredible durability and long distance performance - Provides ultra low friction for ultimate drivetrain efficiency - Waterproof qualities excelling in wet conditions - 95% biodegradable

- Specially formulated to remove heavy chain grime quickly and safely - Leave the chain contaminant free - Chain cleaner spray uses advanced solvents to cut through dirt and grease quickly and effectively

Fingerprints and glossy marks are now a thing of the past. Matte Finish Detailer has been specifically developed for satin matte paints, matte finishes and matte vinyl wraps. The premium-grade formula will leave any matte surface with a streak and gloss-free protective finish that reduces dirt adhesion. - Quick to use spray developed specifically for matte finishes - Leaves a non-sticky, streak and gloss-free protective finish - Carbon Fiber safe - Biodegradable

Our Water Soluble Degreaser quickly and safely eliminates built-up oil, grease, and grime on metal, plastic, rubber, and seals. Its unique, biodegradable formula means that it can be quickly rinsed away with water to leave your greasy bike parts completely clean. Our R&D team put in the hours to make sure the Water Soluble Degreaser works on even the toughest of grime, including waterproof grease and chain lube residue! - Bio Formula easily cuts through tough grease - Can be used on chains, gears, and individual components - Water-soluble formula for easy cleaning - Works on tough, waterproof grease and chain lube residue - HazMat item not eligible for air shipment

Shimano Hydraulic Disc Brake Fluid - Non-corrosive mineral oil that offers excellent heat expansion properties - Mineral oil will not absorb water from the air - Not caustic and is non-toxic

White Lightning's Epic Ride lets you take on that all day ride and hear only the birds chirping, not your chain squealing. Its unique formula features premium non-petroleum synthetics that provide unheard of durability without the grimey build-up common with synthetic oils. This versatile lube also works wonders on derailleur cables and suspension seals. And, good news for the forgetful amongst us, Epic Ride is lube-and-go, no prep or dry time required!

- A biodegradable degreaser that cuts through the toughest grime - Strong enough for the metal parts, Yet safe enough to clean parts with rubber o-rings and seals, urethane elastomers, and painted surfaces - Exceeds all federal V.O.C. and California carbon regulations - Law prohibits ORM-D materials from shipping by air

Heavy-duty, non-flammable degreaser specifically designed to remove lube, dirt, mud, sand, and other contaminants from bike drivetrains. Unique and proprietary formulation thoroughly cleans all bike drivetrains without harming rubber o-rings or metal surfaces. Non-toxic, non-flammable, and eco-friendly formulation contains no VOCs, harmful acids, CFC’s, or solvents and is 50 state VOC compliant. Makes a great all-purpose wash when diluted 10:1 with water. For use as a bicycle drivetrain degreaser. Safe for incidental contact with other bicycle components. Can be used as an all-purpose bike wash when diluted 10:1 with water. Features - Specially designed for bike drivetrains. - Professional strength formulation. - Safe on o-rings and metal surfaces. - 100% biodegradable. - Contains no VOC's, harmful acids, CFC's or solvents. - Non-flammable.

- Frees seized parts - Disperses moisture to prevent rust and corrosion - Provides light lubrication for moving parts - Reduces metal-to-metal contact - Prevents dirt adhesion - Cuts down on friction to improve component efficiency

Silicon Shine not only leaves your bike looking factory fresh, but it also acts as an amazing friction reducer for suspension parts and reduces dirt adhesion. Spray it onto your fork stanchions and rear shocks to reduce resistance for a silky smooth, World Cup performance. - Protects and leaves a sparkling shine on metal, plastic & rubber parts - Reduces friction on fork stanchions and rear shocks - Silicon formula prevents grime build up on treated surfaces - Cuts down on future cleaning and maintenance

HPG-1 Park Tool High Performance Grease is proprietarily blended to meet the demanding needs of today’s high performance bicycles and high end components. -Superior adherence and extended lubrication life -Extreme temperature range: -20°F to 540°F (-29°C to 282°C) -Highly water resistant -Perfect for high end applications including precision ground and ceramic bearings, pivots and suspension components 4-ounce (113 g) tube

- Superior formulated dot brake fluid for dot 3 and dot 4 applications - Exceeds DOT 5.1 "Silicone" specifications - Synthetic glycol-ether formula will mix with other brake fluids conforming to US FMVSS: Dot 3/4 Requirements - Lasts up to 3 years in high performance conditions